6 Series 630i (N52K) Coupe
63 21 101
Replacing sealing frame for left or right rear
light (on side panel)
Necessary preliminary tasks:
•
Remove rear light
Detach sealing frame for rear light (1) from rear light (2).
Clean bonding surface and allow to dry.
Installation:
Make sure sealing frame for rear light (1) is correctly bonded all
round on rear light (2).
Make sure sealing frame for rear light (1) is correctly seated on
rear light (2)
Build date up to 09/2007:
Sealing frame for rear light (1) is centered via guides (3).
Build date after 09/2007:
Sealing frame for rear light (1) is centered via guides (4).
RA Replacing sealing frame for left or right rear light (on side panel)
BMW AG - TIS
16.01.2013 22:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -