6 Series 630i (N52K) Coupe
64 31 010
Replacing microfilter for interior ventilation
Important!
Risk of damage!
A/C system must not be operated without the prescribed filter
element.
Follow manufacturer's instructions.
Security version:
When replacing microfilter air duct, pay attention to engine
compartment protective plating .
If necessary, disconnect plug connection for engine hood contact
switch.
Turn quick-release fastener (1) approx. 90
°
counterclockwise.
Open holder (2) in direction of arrow.
Remove microfilter air duct (3) in direction of arrow.
Installation:
Make sure microfilter air duct (3) is correctly seated.
Lever microfilter for interior ventilation (1) in direction of arrow out
of microfilter air duct (2) and remove.
Installation:
Make sure microfilter for interior ventilation (1) is correctly seated
in microfilter air duct (2).
RA Replacing microfilter for interior ventilation
BMW AG - TIS
16.01.2013 23:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -