6 Series 630i (N52K) Coupe
66 31 001
Adjusting ACC sensor
Special tools required:
•
36 1 100
•
66 3 150
Unclip trim (1) at points (2) and remove in direction of arrow
from bumper trim (3).
Installation:
Make sure trim (1) is correctly seated.
Locking hooks (2) and retaining element (3) must not be
damaged.
Carry out adjustment of ACC sensor (1) with special tool
66 3 150 by means of adjusting screws (2).
RA Adjusting ACC sensor
BMW AG - TIS
16.01.2013 23:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -