6 Series 630i (N52K) Coupe
66 54 001
Adjusting night vision camera
Note:
Mechanical adjustment - as described in the following - is only
possible axially.
Vertical adjustment can only be carried out with the
BMW diagnosis system:
•
Service functions
-> Body
-> Night vision
-> Night vision camera
-> Vertical adjustment
For further information on the night vision system,
refer to SBT on the subject of "Night Vision".
Necessary preliminary tasks:
•
Remove grille in bumper trim on left
Note:
Front of car must be parallel at distance (A) to headlight aiming device (1).
A = 1.5 m
Align a suitable straight object (2), e.g. a spirit level, horizontally on headlight aiming device.
Slowly carry out axial adjustment of night vision camera at adjusting screw (3).
RA Adjusting night vision camera
BMW AG - TIS
16.01.2013 23:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -