6 Series 630i (N53) Coupe
11 14 010
Replacing vacuum pump sealing cover (N53)
Special tools required:
•
11 8 531
•
11 8 532
•
11 8 533
•
11 8 534
•
11 8 536
•
11 8 537
Necessary preliminary tasks:
•
Remove fan cowl.
•
Remove alternator drive belt.
•
Remove both drive belt pretensioners.
Note:
For purposes of clarity, illustrations show alternator and servo
pump.
Secure special tool 11 8 531 with knurled screws 11 8 536
and 11 8 537 with sleeve 11 8 536 .
Secure special tool 11 8 532 against falling down.
Position special tool 11 8 532 by hand on sealing cover.
Screw in special tool 11 8 534 and press out end cover
diagonally.
RA Replacing vacuum pump sealing cover (N53)
BMW AG - TIS
17.01.2013 11:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
