6 Series 630i (N53) Coupe
Disconnect plug connection for oxygen control sensor, cylinders
1 to 3, and unclip from fixture.
Release oxygen control sensor (1) with special tool
11 4 260 .
Tightening torque: 11 78 1AZ
.
Installation:
Cable colour black, cylinders 1 to 3.
Disconnect plug connection for oxygen control sensor, cylinders
4 to 6.
Release oxygen control sensor (1) with special tool
11 4 260 .
Tightening torque: 11 78 1AZ.
Installation:
Cable colour grey, cylinders 4 to 6.
Note cable routing of oxygen control sensor.
Assemble engine.
Check function of DME.
RA Removing and installing/replacing both lambda oxygen control sensors (N53)
BMW AG - TIS
17.01.2013 11:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
