bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

7 RA Removing_replacing Knock Sensors (N54, N53)|Page 422 > < 6 RA Replacing Control Unit (DME)|Page 420
Page 1
background image

12 14 600

Removing/replacing knock sensors (N54,
N53)

Special tools required:

13 5 281

13 5 282

32 1 270

Warning!

Disconnect battery negative terminal (risk of fire due to short-
circuiting on removal).

Electric fuel pump starts up automatically each time door is
opened!

Carry out installation work on fuel system only with coolant
temperature below 40 

°

C.

Important!

Adhere to conditions of absolute cleanliness when working on
the high-pressure fuel system.

Introduced contaminants can cause malfunctions in the
system!

Do not allow any dirt particles or foreign bodies to get
into the system.

Remove all traces of dirt before removing pipes or
individual components.

Use only fluff-free cloths.

Seal all fuel system openings with protective caps or
plugs.

RA  Removing/replacing knock sensors (N54, N53)

BMW AG - TIS

17.01.2013  11:32

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

7 RA Removing_replacing Knock Sensors (N54, N53)|Page 422 > < 6 RA Replacing Control Unit (DME)|Page 420