6 Series 630i (N53) Coupe
•
Seal all fuel system openings with protective caps or
plugs.
Necessary preliminary tasks:
•
Remove intake air manifold
Recycling:
Fuel escapes when fuel lines are detached.
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
N53 only:
Lay exhaust gas recirculation (1) upwards to one side.Do not
remove.
Unlock plug (1) and remove.
Release low-pressure sensor (2).
Tightening torque 13 53 4AZ
.
Important!
When releasing and tightening down sensor, grip at width
across flats of low-pressure line (3).
Note:
Seal low-pressure line (3) if necessary with a matching plug from
special tool kit 32 1 270 .
RA Replacing low-pressure fuel sensor (N54, N53)
BMW AG - TIS
17.01.2013 11:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
