6 Series 630i (N53) Coupe
17 22 010
Removing and installing/replacing heat
exchanger for automatic transmission
Special tools required:
•
17 0 030
Necessary preliminary tasks:
•
Follow instructions for working on cooling system
•
Drain coolant from radiator
•
Remove engine underbody protection
Recycling
Catch and dispose of drained coolant.
Transmission fluid emerges when oil lines are detached from heat
exchanger.
Catch and dispose of escaping transmission fluid.
Observe country-specific waste-disposal regulations.
Release catch (1) in direction of arrow.
Disengage mounting plate (2) in direction of arrow.
Installation:
Engage mounting plate (2) in mounting (3).
RA Removing and installing/replacing heat exchanger for automatic transmission
BMW AG - TIS
17.01.2013 11:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -