6 Series 630i (N53) Coupe
Release screws (1).
Take off holder (2).
Version 2:
Grip clamping sleeve (1).
Slacken nut (2).
Detach retainer (3) downwards using a screwdriver.
Pull cable (4) out of holder.
Installation:
Adjust selector lever
Version 2:
Release nut and disengage cable (1).
Installation:
Unfasten nut.
Adjust cable by means of holder (2) until spacing A = 1 mm is
obtained
Tighten nut.
Support engine.
RA Removing and installing automatic transmission (6HP19Z/N52/N52K/N53)
BMW AG - TIS
17.01.2013 12:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
