6 Series 630i (N53) Coupe
Important!
Cut outer metal sheet only.
Measurement a = approx. 150 mm from roof edge
Measurement b = approx. 450 mm after bore dia. 20 mm
Measurement b = approx. 230 mm
Open weld joints in areas (1) and (4).
Open adhesive bonds in areas (3).
Installation information:
-
Apply window glass adhesive to cavity acoustic baffles (2).
-
Apply adhesive in areas (3).
-
Weld in reinforcement plates at severance cuts.
-
Bond and rivet new part in area (4).
Use Hemlock 813 blind rivet (sourcing reference: BMW Parts Service picture board - Aluminium and
steel/bonding and welding).
Double number of rivets with respect to welding spots in area (4).
Open weld joints in areas (1).
Open brazed joints in areas (2).
RA Replacing rear left side panel
BMW AG - TIS
17.01.2013 16:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -