6 Series 635d (M57T2) Coupe
Slacken clamp (1) and release turbocharger from exhaust
manifold.
Installation:
Replace clamp.
Release screws (3) on cylinder head at rear.
Remove all finger rockers (1) and set down in order.
Remove all compensating elements (2) and set down in order.
Important!
Worn rockers may only be reused on the same grooves of the
camshaft.
Release screws (1).
RA Removing and installing cylinder head (M57T2)
BMW AG - TIS
21.01.2013 21:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -