6 Series 635d (M57T2) Coupe
Note:
Joints between timing case cover and engine block are sealed
with sealing strips stuck on as standard.
It is not necessary to apply a permanently elastic sealing
compound.
Check dowel sleeve (1) for damage and replace if necessary.
Transitions (2) must be absolutely free of grease.
Fit new cylinder-head seal.
Carefully fit cylinder head.
Fit new cylinder head screws.
Tighten down the cylinder-head bolts in order 1 ... 14.
Tightening torque 11 12 1AZ
.
Use special tool 00 9 120 for torsion angle tightening.
RA Removing and installing cylinder head (M57T2)
BMW AG - TIS
21.01.2013 21:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
