6 Series 635d (M57T2) Coupe
34 11 000
Removing and installing/replacing brake
linings on both front disc brakes
Special tools required:
•
34 1 080
•
34 1 280
•
34 6 320
Important!
The brake pad wear sensor must be replaced once it has
been removed (brake pad wear sensor loses its retention
capability in the brake pad).
Necessary preliminary tasks:
•
Remove wheels
•
Remove brake pad wear sensor
Observe safety instructions on raising the vehicle.
Lever out retaining spring (1) in direction of arrow towards rear.
Installation:
Attach retaining spring (1) first at top and bottom and then allow
retaining lug (2) to engage in recess of brake caliper housing.
RA Removing and installing/replacing brake linings on both front disc brakes
BMW AG - TIS
22.01.2013 00:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -