6 Series 635d (M57T2) Coupe
41 14 511
Replacing complete rear left wheel arch (rear
left side panel removed)
Read contents of Body, General.
Refer to the description texts of the KSD CD (FRU
41 14 511) for details of stripping-down and rigging work.
Spot-weld bonding is used on this vehicle. Observe
specific procedure.
Place vehicle on straightening bench.
Following new body parts are required (refer to EPC):
-
(1) Wheel arch, outer, rear
-
(2) Reinforcement, C-pillar, inner
-
(3) Wheel arch, rear, inner half
Mark severance cut in accordance with measurement a and cut.
Important!
Cut outer metal sheet only.
Measurement a = approx. 280 mm from roof edge.
RA Replacing complete rear left wheel arch (rear left side panel removed)
BMW AG - TIS
22.01.2013 01:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -