6 Series 635d (M57T2) Coupe
61 13 ...
Removing and installing/replacing OBD-II
socket
Special tools required:
•
61 0 315
Necessary preliminary tasks:
•
Remove trim for pedal assembly
Note:
OBD-II socket cover (2) is not fitted on the E63 / E64.
Unlock slide plate (3) with a suitable tool in direction of arrow.
Insert special tool 61 0 315 in OBD-II socket (1) in direction of
arrow and press out associated flat spring contact (4). Press
remaining flat spring contacts with special tool 61 0 315 out of
OBD-II socket (1).
Installation:
Pay attention to pin assignment of OBD-II socket (1).
Make sure flat spring contacts and slide plate (3) are correctly
engaged and seated in OBD-II socket (1).
RA Removing and installing/replacing OBD-II socket
BMW AG - TIS
22.01.2013 16:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -