6 Series 635d (M57T2) Coupe
Disconnect plug connections (1)
Disconnect Bowden cable (2).
Press in button (3) and lift storage compartment (4) out of centre
armrest.
Disconnect Bowden cable (1).
Installation:
Make sure Bowden cable is correctly guided.
Release screws (1).
Disconnect plug connections (2) and remove vehicle
centre sensor (3).
Tightening torque 65 77 6AZ
.
Replacement:
Carry out programming/coding.
RA Removing and installing (replacing) vehicle centre sensor
BMW AG - TIS
22.01.2013 17:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -