6 Series 645Ci (N62) Coupe
Drive out water pipe (1) with special tool 23 1 040 at
cutout (2) towards front.
Installation:
Replace water pipe (1) and sealing ring (3).
Installation:
Clean sealing surfaces and replace seal.
Install timing case cover, insert all screws and initially tighten to
approx. 5 Nm.
Fully tighten all screws in alternate sequence.
Tightening torque 11 14 1AZ
.
Important!
Once all screws have been tightened down, retighten them in
a second operation.
Replace radial seal in timing case at bottom.
RA Removing and installing bottom timing case cover (N62 / N62TU)
BMW AG - TIS
18.01.2013 05:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -