6 Series 645Ci (N62) Coupe
Release screw (1).
Remove torsion spring (1) and special tool
11 9 490 .
Remove the intermediate levers and torsion springs of
cylinders 1 to 3 according to the same procedure and set down
in an orderly fashion.
Unscrew nut (special tool 11 9 473 ).
RA Removing and installing/replacing right inlet camshaft (N62 to 9/03)
BMW AG - TIS
18.01.2013 05:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -