6 Series 645Ci (N62) Coupe
Feed out inlet adjustment unit (1).
Secure timing chain to prevent it from sliding down.
Installation:
Installation of inlet and exhaust adjustment units is described
separately from removal.
Important!
Danger of mix-up:
Inlet and exhaust adjustment units are different.
Mixing up the inlet and exhaust adjustment units will cause
damage to the engine.
1.
Inlet adjustment unit (1) is marked with EIN and IN.
2.
Exhaust adjustment unit (2) is marked with AUS and EX.
Note:
Position of inlet adjustment unit (1) to timing chain can be freely
selected.
Pull timing chain up.
Feed inlet adjustment unit (1) into timing chain and fit onto inlet
camshaft.
RA Removing and installing/replacing inlet and exhaust adjustment units on left sid
BMW AG - TIS
18.01.2013 05:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
