6 Series 645Ci (N62) Coupe
Hold torsion spring (1) with special tool 11 9 480 .
Install intermediate lever (2) from above.
Insert end of torsion spring (1) into guide on intermediate
lever (2).
Remove special tool 11 9 474 .
Remove special tools 11 9 472 and special tools 11 9 475 .
Ends of compression rings (1) point upwards.
Make sure compression rings (1) are engaged at ends.
RA Removing and installing/replacing left intermediate levers (N62 from 9/03 and N6
BMW AG - TIS
18.01.2013 05:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -