6 Series 645Ci (N62) Coupe
Installation:
Replace sealing ring (1) and secure with grease.
Drive (2) must be rotated into correct position prior to installation.
Installation:
Align vacuum pump drive to groove (3) on exhaust camshaft.
Vacuum pump can best be installed when groove (3) is vertically
aligned.
If vacuum pump cannot be installed, crank engine if necessary at
central bolt into correct position.
RA Removing and installing/replacing vacuum pump (N62/N62TU)
BMW AG - TIS
18.01.2013 06:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -