6 Series 645Ci (N62) Coupe
Installation:
Fit profile seals correctly.
Check for water leaks.
1
Ground connection
5
2
Ground connection
6
VVT control unit
3
DME module 1 and 2
7
IVM integrated supply module
4
Remove profile seal (4) in direction of arrow
Assemble engine.
Note:
Check function of DME.
Check electronics box cover and rubber grommets on equipment
carrier for watertightness.
RA Replacing wiring harness section for engine (N62)
BMW AG - TIS
18.01.2013 06:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
