6 Series 645Ci (N62) Coupe
Insert special tool 16 1 080 into filler neck.
Special tool 16 1 080 has two different diameters for
petrol/gasoline and diesel vehicles!
Slide extraction hose of extractor unit, refer to BMW Service
Workshop Equipment and Planning Documentation, through
special tool 16 1 080 into the fuel filler pipe, turning in the
process if necessary.
Draw off fuel as much as possible with extractor unit, refer to
BMW Service Workshop Equipment and Planning Documentation.
Follow drawing off of fuel on fuel gauge in instrument cluster.
Draining fuel filter and surge chamber:
Connect special tool 13 5 460 to connection of fuel filter (1).
Connect special tool to extractor unit.
Draw off remaining fuel from filter and surge chamber.
Note:
A small amount of fuel still remains in the fuel tank.
Drawing off residual fuel amount from fuel tank:
Drawing off residual fuel amount is not included in the time value
of this operation.
Important!
Ensure car interior is adequately ventilated.
Catch dripping fuel in a suitable container.
Remove fuel gauge sensor (right).
Remove fuel gauge sensor (left).
Draw off residual fuel quantity through installation openings.
Fuel filling:
Insert special tool 16 1 080 into filler neck.
Special tool 16 1 080 has two different diameters for
petrol/gasoline and diesel vehicles!
Slide extraction hose of extractor unit, refer to BMW Service
Workshop Equipment and Planning Documentation,
approx. 40 cm into fuel filler pipe.
Fill fuel from suction extractor unit.
RA Draining and filling fuel tank
BMW AG - TIS
18.01.2013 06:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
