6 Series 645Ci (N62) Coupe
23 00 112
Removing and installing transmission
(GS6S53BZ SMG)
Special tools required:
•
00 2 030
•
21 0 135
•
21 2 240
•
23 0 131
•
23 0 132
•
23 0 136
Important!
After completing work:
-
Perform adaptation using DIS Tester, refer to Service
Functions in DIS Tester (Teach in transmission)
-
Check transmission oil level
Use only the approved transmission oil
-
Check fluid level in hydraulic system
-
Read out fault memory and clear entered faults
Failure to comply with this requirement will result in serious
damage to the manual transmission.
Necessary preliminary tasks:
•
Disconnect battery
•
Remove front underbody protection
•
Remove reinforcement plate
Important notes on installation are described in this work step
•
Remove complete exhaust system
•
Remove oxygen sensors
RA Removing and installing transmission (GS6S53BZ SMG)
BMW AG - TIS
18.01.2013 06:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
