6 Series 645Ci (N62) Coupe
Press in retaining lugs (1) with screwdriver (2) and remove cable
duct (3).
Tie wiring harness to one side.
Release screws (1).
Tightening torque 23 00 1AZ
.
Supporting transmission:
Support transmission with special tools 23 4 050 , 23 0 132
and 00 2 030 .
Secure transmission with tensioning strap (1).
Tasks are described in Transmission bracket.
After completion of work, check transmission oil level.
Release screws (1) and nuts (2) and remove cross-member.
Tightening torque 22 32 3AZ/4AZ
.
RA Removing and installing transmission (GS6-53BZ) N62/N62TU
BMW AG - TIS
18.01.2013 06:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -