6 Series 645Ci (N62) Coupe
24 13 012
Replacing output flange shaft seal
(GA6HP26Z/6HP32Z)
Special tools required:
•
23 0 020
•
24 2 351
•
24 2 352
•
24 2 353
•
24 2 370
•
24 2 380
Important!
After completion of work, check gear oil level.
Use only the approved gear oil.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Necessary preliminary tasks:
•
Remove underbody protection.
•
Remove complete exhaust system.
•
Remove transmission underbody protection (E65 only).
Remove heat shields (1) and (2).
Note:
Illustration similar
RA Replacing output flange shaft seal (GA6HP26Z/6HP32Z)
BMW AG - TIS
18.01.2013 07:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -