6 Series 645Ci (N62) Coupe
37 14 511
Replacing front ride-height sensor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Note:
•
Build date up to 03/04: Variant (A) - connection (1) points
downwards
•
Build date from 03/04: Variant (B) - connection (2) points
upwards
Build date up to 03/2004:
Important!
If the front ride-height sensor has been installed twisted in
relation to variant (A), e.g. due to wiring harness
replacement, the following control units must be recoded.
•
Light module with headlight vertical aim control
•
Adaptive headlight
Necessary preliminary tasks:
•
If necessary, remove right steering gear cover
RA Replacing front ride-height sensor
BMW AG - TIS
18.01.2013 08:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -