6 Series 645Ci (N62) Coupe
Installation:
Do not remove existing lid gasket in areas (1). If necessary, stick
on again.
Place new components on body. Set up windscreen, glass tilt roof,
roof trim strips and rear window for positioning.
Make sure there are parallel gaps between glass tilt roof and roof
halves.
Observe E63 gap dimensions.
Apply sealing compound between roof outer skin and side frame.
RA Replacing front and rear roof outer skin (version with slide/tilt sunroof)
BMW AG - TIS
18.01.2013 09:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
