6 Series 645Ci (N62) Coupe
51 45 177
Removing and installing/replacing panel for
active knee protector on left
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt tensioners.
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
•
Remove luggage compartment floor trim
•
Disconnect negative battery cable
•
Remove trim panel for pedal assembly
Release screws (1) and lower panel for left active knee
protection (2).
Installation:
Replace screws.
Tightening torque 72 12 05AZ
.
Unlock plug connection (3) of panel for left active knee
protection (2), disconnect and remove panel for left active knee
protection (2).
Important!
Always replace panel for active knee protector on left
complete.
Do not carry out any repairs on the panel for the left active
knee protection.
RA Removing and installing/replacing panel for active knee protector on left
BMW AG - TIS
18.01.2013 09:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
