6 Series 645Ci (N62) Coupe
Gap adjustment:
•
Slacken Torx screws (1) so that sunroof lid (2) can still just
be adjusted.
•
Move sunroof lid as required.
•
Make sure all screws are tightened down.
•
Tightening torque 54 10 5AZ
.
Checking gap:
Check same gap (A) in relation to body with special tool
00 9 341 .
Slide special tool 00 9 341 or similar between seal and insert. It
must be possible to slide the card against the same level of
resistance.
Slide glass lid towards front or rear until ideal position is reached.
RA Adjusting glass tilt sunroof lid
BMW AG - TIS
18.01.2013 10:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
