6 Series 645Ci (N62) Coupe
54 10 155
Removing and installing/replacing rear
floating roofliner
Necessary preliminary tasks:
•
Remove front roofliner
Important!
Make sure that grease on the rails does not come into contact
with the floating roofliner.
Move rear floating roofliner (1) towards front (close).
Loosen screws (2).
Tightening torque 54 10 7AZ
.
Slide roofliner (1) uniformly towards front.
If necessary, raise slider (2) for front and rear floating roofliners.
Move slider (2) back until there is no longer any contact with the
roofliner (1).
RA Removing and installing/replacing rear floating roofliner
BMW AG - TIS
18.01.2013 10:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
