6 Series 645Ci (N62) Coupe
63 99 076
Replacing bulb for left (or right) xenon
headlight (up to 09/2007)
Warning!
Version with xenon headlights: Danger to life due to high
voltage! Therefore, before removing, disconnect all
components from the power supply (lighting system and
ignition off).
Work on the entire xenon lighting system (control unit, ignition
unit and lamp) may only be carried out by specialist
personnel.
Follow instructions for handling light bulbs (exterior lights).
Necessary preliminary tasks:
•
Remove ignition unit for xenon headlight
Turn retaining ring (1) in counterclockwise direction and remove.
Remove bulb for xenon headlight (2) in direction of arrow from
headlight (3).
Installation:
Insert bulb for xenon headlight (2) exactly in headlight (3).
Note type of bulb.
Installation:
Pay attention to marking (1).
Fit retaining ring (2) on headlight is such a way that
apertures (3) slide over fixtures for ignition unit (4).
Make sure retaining ring (2) is correctly engaged on headlight.
RA Replacing bulb for left (or right) xenon headlight (up to 09/2007)
BMW AG - TIS
18.01.2013 11:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
