6 Series 645Ci (N62) Coupe
64 11 916
Replacing temperature sensor for cold-air
distributor
Necessary preliminary tasks:
•
Remove audio system controller /
remove Car Communication Computer
Disconnect plug connection (2).
Important!
Do not bend temperature sensor for cold-air distributor (1).
Turn temperature sensor for cold-air distributor (1)
counterclockwise, feed out towards bottom and remove.
If necessary, release screws (3) and (4).
Pull back center function carrier (5) at top slightly.
Installation:
Make sure temperature sensor for cold-air distributor (1) is
correctly seated.
RA Replacing temperature sensor for cold-air distributor
BMW AG - TIS
18.01.2013 11:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
