6 Series 645Ci (N62) Coupe
Release all screws (1) on holder (2).
Tightening torque 72 12 03AZ
.
Release rear screw.
Tightening torque 72 12 04AZ
.
Remove rear AHPS1.
Release front screws (1 and 2).
Tightening torques:
-
Screw 1
72 12 04AZ
-
Screw 2
72 12 06AZ
Carefully feed gas generator out of guides towards rear,
unlocking and disconnecting plug (3) in the process.
Remove gas generator completely.
Note:
View of retaining screw with anchor fitting of AHPS1 head airbag:
1
Anchor fitting, AHPS1 head airbag
2
Lock washer
3
Retaining screw
RA Removing and installing/replacing left or right AFPS1 head airbag (version witho
BMW AG - TIS
18.01.2013 12:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -