6 Series 650i (N62TU) Coupe
11 21 531
Replacing all main crankshaft bearing shells
(N62/N62TU)
Special tools required:
•
00 2 590
•
00 9 120
Necessary preliminary tasks:
•
(engine dismantled)
•
Clean components before installing.
•
Preparatory tasks are described in the section Replacing
crankshaft.
Note:
Install main bearing shells (1) with lubrication groove in
crankcase.
Install main bearing shells (2) without lubrication groove in
the main bearing caps.
The letter (1) denotes the crankshaft construction stage.
S= Series
B= Construction stage 1
C= Construction stage 2
The numbers (2) denote the bearing shell classification for the
relevant bearing position from 1 to 5 (main bearing cap).
1= yellow
2= green
3= violet
RA Replacing all main crankshaft bearing shells (N62/N62TU)
BMW AG - TIS
18.01.2013 21:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -