6 Series 650i (N62TU) Coupe
12 42 500
Removing and installing or replacing battery
positive lead (between alternator, starter
motor and jump start connection point) (N62,
N62TU)
Work step
Note:
Switch off ignition
Disconnect battery negative lead
Follow instructions for disconnecting and
connecting battery
Disconnect battery positive lead at jump start connection point
Tightening torque 12 42 1AZ
.
Remove intake air manifold
Remove fan cowl
Detach battery positive lead from alternator
Release expansion tank
Secure engine in installation position with special tool
Release both engine mounts from above
Lower front axle
Remove right exhaust manifold
Remove heat shield from starter motor
Detach battery positive lead from starter motor
Tightening torque 12 41 4AZ
.
Remove battery positive lead
RA Removing and installing or replacing battery positive lead (between alternator,
BMW AG - TIS
18.01.2013 22:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -