6 Series 650i (N62TU) Coupe
Necessary preliminary tasks:
•
Disconnect battery.
•
Remove reinforcement plate.
Important notes on installation are described in this work
step.
•
Remove exhaust system after catalytic converter.
•
Remove oxygen sensors.
•
Support engine.
Remove heat shields (1) and (2).
Detach plug (1) from speed sensor.
Release screw (2) and remove speed sensor.
Detach plug (1) from oil level sensor and unclip cable from
fixtures.
RA Removing and installing automatic transmission (6HP26Z/ N62, N62TU)
BMW AG - TIS
18.01.2013 22:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -