6 Series 650i (N62TU) Coupe
51 16 366
Removing and installing right glovebox with
housing (without active knee protection)
Necessary preliminary tasks:
•
Remove trim for instrument panel, bottom right
Release screws (1).
To release screws (2), release damper if necessary.
Release screws (2) and pull back glovebox with housing (3).
Disconnect Bowden cable (1).
Disconnect plug connections (2) and remove glovebox with
housing (3).
Installation:
Make sure glovebox with housing (3) is correctly seated in
associated mountings.
RA Removing and installing right glovebox with housing (without active knee protect
BMW AG - TIS
19.01.2013 01:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -