6 Series 650i (N62TU) Coupe
Important!
Do not damage door lock seal during removal.
Release screws (1).
Remove door lock (2) from inside.
Important!
To avoid leaking and electrical malfunction:
Pull door lock (2) with special tool into corner (3), see Figs.
R51 3381 and R51 7594.
Driver's door only:
Installation:
Insert inside door lock (1) correctly into paddle (2) of lock
cylinder (3).
Installation:
Seal (1) on door lock (2) must not be damaged.
Installation:
-
Install door lock and insert screws (1), do not tighten down.
-
Slide special tool 51 2 190 into opened rotary latch until
latch engages in first stage.
RA Removing and installing/replacing door lock in left or right front door
BMW AG - TIS
19.01.2013 01:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
