6 Series 650i (N62TU) Coupe
61 35 714
Removing and installing/replacing control
unit for slide/tilt sunroof
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove trim for instrument panel at bottom right
Open lock (1) and pull back control unit for slide/tilt sunroof (2).
Disconnect associated plug connections (3).
Remove control unit for slide/tilt sunroof (2).
Installation:
•
Initialize slide/tilt sunroof
RA Removing and installing/replacing control unit for slide/tilt sunroof
BMW AG - TIS
19.01.2013 03:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -