6 Series 650i (N62TU) Coupe
63 21 180
Removing and installing/replacing left or right
rear light (in side panel)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Partially remove luggage compartment wheel arch trim
Disconnect plug connection (1).
Note:
When releasing nuts (2) and screw (3), grip associated
adjusting element (6) with a suitable tool.
Unscrew nuts (2). Tightening torque 63 21 1AZ
.
Release screw (3). Tightening torque 63 21 2AZ
.
Remove rear light (4) in outwards direction from side panel (5).
Installation:
Observe gap dimensions.
If necessary, adjust rear light (4) to fit by way of adjusting
elements (6).
Replace sealing frame for rear light.
RA Removing and installing/replacing left or right rear light (in side panel)
BMW AG - TIS
19.01.2013 03:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -