6 Series 650i (N62TU) Coupe
63 25 000
Removing and installing/replacing
supplementary brake light (up to 09/2007)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Detach cover for supplementary brake light (1) on both sides in
direction of arrow and unclip at points (2).
Feed cover for supplementary brake light (1) in direction of arrow
out of moulded roofliner (3) and remove.
Installation:
Retaining bar (1), retaining clips (2) and guides (3) must not be
damaged.
Make sure supplementary brake light cover (4) is correctly seated
on moulded roofliner.
Disconnect plug connection (1).
Unlock slide (2) on both sides and remove supplementary brake
light (3) in direction of arrow from rear window (4).
Installation:
Make sure supplementary brake light (3) is correctly positioned in
rear window (4).
RA Removing and installing/replacing supplementary brake light (up to 09/2007)
BMW AG - TIS
19.01.2013 03:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
