6 Series 650i (N62TU) Coupe
64 11 206
Removing and installing or replacing heater
Necessary preliminary tasks:
•
Draw off refrigerant from A/C system
•
Remove instrument panel trim
•
Remove temperature sensor for cold-air distributor
•
Remove control unit for Car Access System
•
In appropriate version:
-
Remove head-up display
Warning!
Cover protruding threaded pins, corner points and edges on
support tube to prevent injuries.
Warning!
Follow instructions for working on cooling system.
Unscrew nuts (1).
Installation:
Tightening torque 64 53 8AZ .
Detach refrigerant line (2) in direction of arrow.
Unclip refrigerant line (3).
RA Removing and installing or replacing heater
BMW AG - TIS
19.01.2013 03:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
