6 Series 650i (N62TU) Coupe
Pull back support tube (5) and remove from vehicle with assistance of a second person.
If necessary, unlock and disconnect plug connections on
heater (1).
Remove heater (1) in direction of arrow.
Installation:
Make sure heater (1) is correctly seated.
Installation:
Make sure condensate drain (1) is correctly seated in
grommet (2) on both sides.
RA Removing and installing or replacing heater
BMW AG - TIS
19.01.2013 03:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -