6 Series 650i (N62TU) Coupe
67 61 005
Removing and installing/replacing drive with
gear (front) for actuating slide/tilt sunroof
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove front roofliner trim
Note:
Secure drive with gear for actuating slide/tilt sunroof (3) against
falling out.
Unfasten plug connection (1) and disconnect.
Release screws (2), tightening torque 54 13 1AZ
.
Note:
Screws (1) are microencapsulated.
Feed drive with gear for actuating slide/tilt sunroof (3) out of
roofliner (4) and remove.
Installation:
Insert gear wheel (1) of drive with gear for actuating slide/tilt
sunroof (2) exactly in gear teeth (3).
RA Removing and installing/replacing drive with gear (front) for actuating slide/ti
BMW AG - TIS
19.01.2013 04:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -