6 Series 650i (N62TU) Coupe
72 11 033
Removing and installing/replacing front seat
belt (reel)
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt tensioners.
Inexpert handling can trigger off the airbag or the belt
tensioner and thus cause injuries.
Necessary preliminary tasks:
•
Removing and installing rear left or right side trim panel
•
Removing and installing or replacing trim on left or right door
pillar (top)
Note:
If a seat belt which is damaged due to an accident is
exchanged, always check the slide bar (6) for damage
(bending) and replace if necessary.
1 = Protective cap
2 = Screw securing slide bar to body
Tightening torque 72 11 04AZ
.
3 = Rosette
4 = Space bush
5 = Strap
6 = Slide bar
RA Removing and installing/replacing front seat belt (reel)
BMW AG - TIS
19.01.2013 04:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
