bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
4 RA Removing And Installing_replacing Eccentric Shaft Sensor (N52) > < 3 RA Removing And Installing_replacing Positioning Motor For Eccentric Shaft (N52)

6 Series E64 630i (N52) CONVER

Page 2
background image

Release screws (3).

Tightening torque: 11 12 5AZ

.

Note:

Screw (4) is under servodrive.

Release screw (4).

Turn servodrive with screw (2) counterclockwise in direction of
arrow.

Servodrive can now be withdrawn in direction of arrow.

Installation:

All removed subassemblies are reinstalled in reverse sequence.

Screw in shaft (2) in counterclockwise direction until servodrive
rests on flange of cylinder head cover.

Assemble engine.

Check function of DME.

RA  Removing and installing/replacing positioning motor for eccentric shaft (N52)

BMW AG - TIS

25.01.2013  22:43

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

4 RA Removing And Installing_replacing Eccentric Shaft Sensor (N52) > < 3 RA Removing And Installing_replacing Positioning Motor For Eccentric Shaft (N52)