6 Series E64 630i (N52) CONVER
Release screws (2).
Note:
Have cleaning cloth ready to catch residual oil.
Tightening torque: 11 42 2AZ
.
Installation:
Replace all seals.
If necessary, replace filter element.
Assemble engine.
Note:
Protect drive belt against dirt.
Installation:
Venting instructions must be observed without fail.
RA Removing and installing/replacing fullflow oil filter (N52)
BMW AG - TIS
25.01.2013 22:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -