6 Series E64 630i (N52) CONVER
-
Remove propeller shaft from transmission.
-
Release center bearing.
-
Tie propeller shaft to one side.
Tasks are described in Removing propeller shaft.
Release screw (1).
Disconnect plug-in connections (1) and (2).
Release cable strap (3).
Disconnect plug connections (1) and (2) and unclip cable from
holder.
RA Removing and installing transmission (GS6S37BZ SMG) N52
BMW AG - TIS
26.01.2013 00:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -